ご注意：あなたは前提となるガイドを編集しています。あなたが行なう変更は、この手順を含むガイド全体に反映されます。
手順 5を翻訳中
手順5
-
The EMI filter is connected by three screws. Use the T10 screwdriver to remove them.
-
The screw that holds in both the filter and a wire that is connected to it is a different size and should be kept identifiable from the other two screws.
-
The green and yellow wire that was held in by the different screw is tucked behind another component. To get it out, squeeze it behind the black wire and the filter will be able to be removed from the casing.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。