注意:あなたはさきほど閲覧していたガイドの前提条件を編集しています。あなたが行った変更は、この手順を含む個のガイド全体に影響を与えます。
手順 3を翻訳中
手順3
-
Locate the ribbon cable for the main display on the bottom of the board.
-
Slowly lift off the ribbon connector from its housing using a plastic opening tool.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。