メインコンテンツにスキップ

HP Pavilion dv6000 Motherboard Replacement

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 1を翻訳中

手順1
HP Pavilion dv6000 Motherboard Replacement: 手順 0、 3の画像 1 HP Pavilion dv6000 Motherboard Replacement: 手順 0、 3の画像 2 HP Pavilion dv6000 Motherboard Replacement: 手順 0、 3の画像 3
  • First, put the laptop on a flat surface and make sure the battery side is up.

  • Remove the battery to prevent any electrical damage to any of the components.

  • Remove the following screws:

  • There are five(5) 5.8 mm Phillips screws located in the battery compartment, where the battery formerly resided.

  • There are fifteen(15) 7.2 mm Phillips screws that secure the lower case to the upper case of the laptop.

  • These screw locations and sizes apply for the part number RG274UA#ABA.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります