HP Pavilion dv6000 Motherboard Replacement

注意：あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての2個のガイドに反映されます。

英語

日本語

手順 4を翻訳中

手順4

After taking out the three(3) screws, flip the laptop over so that the keyboard side is up.
Carefully lift speaker grille / button panel away from the upper case by pulling up on the two corners closest to the keyboard. If caution is not taken, permanent damage may occur.
Remove the center cable from its connector on the button panel. Then, gently release the friction locks that secure the left and right ribbon cables by pushing them away from their connectors. The ribbon cables will slip out of their connectors.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。