メインコンテンツにスキップ

iPod 第3世代 ケースの交換

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 4を翻訳中

手順4
iPod 3rd Generation Case Replacement: 手順 0、 2の画像 1 iPod 3rd Generation Case Replacement: 手順 0、 2の画像 2
  • Use a plastic tool or your fingernails to carefully disconnect the orange headphone jack cable. Be sure to pull straight up on the connector, not the cable itself.

  • The headphone jack connector is unusually tall. When prying, be careful to not separate the lower, plastic part of the connector from the ribbon cable. Pry between the connector and the socket, not between the two halves of the connector.

プラスチック製ツールや指の爪を使って、オレンジ色のヘッドホンジャックケーブルの接続を注意深く外します。ケーブルではなく、コネクタのみをまっすぐ引き上げているか確認してください。

ヘッドホンジャックコネクタは、予想していないほどの高さがあります。こじ開けるとき、リボンケーブルからコネクタの下部プラスチック製コンポーネントを離さないでください。コネクタの2つの部分の間ではなく、コネクタとソケットの間から持ち上げてください。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります