手順 3を翻訳中
手順3
-
Check if the braking pads are contacting the rim in desired locations.
-
For the left caliper pad, marked in the red circle, loosen the bolt with a 4mm Allen wrench so the pad can be adjusted.
-
Align the bottom edge of the pad with the bottom edge of the braking surface and then tighten.
-
For the right caliper pad, marked in the yellow circle, loosen the bolt with a 4mm Allen wrench so the pad can be adjusted.
-
Align the top edge of the pad with the top edge of the braking surface and then tighten.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。