メインコンテンツにスキップ

Austausch des Canon Powershot A720 IS Objektivs

英語
ドイツ語

手順 16を翻訳中

手順16
Canon Powershot A720 IS Lens Replacement: 手順 0、 3の画像 1 Canon Powershot A720 IS Lens Replacement: 手順 0、 3の画像 2 Canon Powershot A720 IS Lens Replacement: 手順 0、 3の画像 3
  • Use the screwdriver to remove the three 3 mm Phillips screws from the lens metal frame.

  • Use the screwdriver to remove the two 3.5 mm Phillips screws from the lens metal frame.

  • Pull out the AV DC IN port on the right side of the camera.

  • Turn the camera over so the bottom is exposed to remove the 3 mm Phillips head screw to disassemble the battery housing unit from the camera.

Entferne mit dem Schraubendreher die drei 3-mm-Kreuzschlitzschrauben vom Metallrahmen des Objektivs.

Entferne mit dem Schraubendreher die beiden 3,5-mm-Kreuzschlitzschrauben vom Metallrahmen des Objektivs.

Ziehe den AV DC IN-Anschluss auf der rechten Seite der Kamera heraus.

Drehe die Kamera um, so dass die Unterseite freiliegt, um die 3-mm-Kreuzschlitzschraube zu entfernen und das Akkufach von der Kamera zu demontieren.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります