Canon Powershot A720 IS Motherboard Replacement

英語

日本語

手順 10を翻訳中

手順10

Use the plastic opening tool to separate the user button circuit board from the shutter button and settings dial housing unit.
Carefully disconnect the ribbon cable that is attached to the user buttons circuit board from the ZIF connector that is attached to the motherboard with your thumb and index finger. Get as close to the ZIF connector as possible without touching the motherboard.
Be careful not to the rip the ribbon cable out of the ZIF connector when removing.
Remove the user button circuit board.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。