修理を始めるには コミュニティ ストア

Comment remplacer une chambre à air de vélo crevée sur un Trek 800

ガイドに戻る
英語
フランス語
前の手順 次の手順

手順 10を翻訳中

手順10
Trek 800 Bicycle Rear Tire Bike Tube Replacement: 手順 0、 3の画像 1 Trek 800 Bicycle Rear Tire Bike Tube Replacement: 手順 0、 3の画像 2 Trek 800 Bicycle Rear Tire Bike Tube Replacement: 手順 0、 3の画像 3

  • Make sure the skewer is completely inserted into the frame slots before tightening.

  • Rotate the skewer cap clockwise and ensure a snug contact between the skewer caps and the frame slots.

  • Rotate the skewer lever towards the bicycle frame.

  • If the skewer lever is too difficult to twist towards the frame, back off the skewer cap until you can twist the lever towards the bicycle frame and it feels snug.

Resserrez le serrage rapide et bloquez le levier.

-[* black] Tighten quick release lever and lock.
+[* black] Make sure the skewer is completely inserted into the frame slots before tightening.
+[* black] Rotate the skewer cap clockwise and ensure a snug contact between the skewer caps and the frame slots.
+[* black] Rotate the skewer lever towards the bicycle frame.
+ [* icon_note] If the skewer lever is too difficult to twist towards the frame, back off the skewer cap until you can twist the lever towards the bicycle frame and it feels snug.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。