メインコンテンツにスキップ
英語
日本語

手順 9を翻訳中

手順9
Wiggle the link you just reattached. If it's too stiff, continue on to the next part. Put the chain on the inside guide of the chain breaker and turn the driving pin just a little. Check as you go along and continue until proper looseness is achieved.
  • Wiggle the link you just reattached. If it's too stiff, continue on to the next part.

  • Put the chain on the inside guide of the chain breaker and turn the driving pin just a little. Check as you go along and continue until proper looseness is achieved.

  • As before, do not push the pin all the way out.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります