Trek 4300 Front Derailleur Cable Replacement

英語

日本語

手順 14を翻訳中

手順14

Check the derailleur placement.
The chain should be roughly centered in the derailleur, so that no extra friction is caused, and that the chain is not unintentionally pushed off the sprocket.
If not in the correct position, reloosen the tightening bolt and redo step 13. This may take several tries.
Make sure the shifter is in the same position as the chain. For example, in these pictures the chain is in position 2, and so is the shifter (the gears are numbered smallest to biggest). Otherwise the bike will not be able to properly shift.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。