修理を始めるには コミュニティ ストア

Beats Pill 1.0 Lautsprecher austauschen

ガイドに戻る
英語
ドイツ語
前の手順

手順 2を翻訳中

手順2
Beats Pill 1.0 Speaker Replacement: 手順 0、 1の画像 1

  • Each speaker is held down by two clips. On the front face of the speaker, push the speaker outward while pushing one of the clips that holds it down to the side. Repeat this on the other speaker and clip. The speakers should pop out.

Jeder Lautsprecher wird von zwei Klammern festgehalten. Drücke den Lautsprecher von der Vorderseite her nach außen und gleichzeitig eine der Halteklammern zur Seite. Der Lautsprecher sollte dann herauskommen.

-[* black] Each speaker is held down by two clips. On the front face of the speaker, push the speaker outward while pushing one of the clips that holds it down to the side. The speaker should pop out
+[* red] Each speaker is held down by two clips. On the front face of the speaker, push the speaker outward while pushing one of the clips that holds it down to the side. Repeat this on the other speaker and clip. The speakers should pop out.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。