修理を始めるには コミュニティ ストア

닌텐도 DSi 하단 케이스 어셈블리 교체하기

注意：あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての19個のガイドに反映されます。

ガイドに戻る
英語
韓国語
次の手順

手順 1を翻訳中

手順1
Nintendo DSi Lower Case Assembly Replacement: 手順 0、 2の画像 1 Nintendo DSi Lower Case Assembly Replacement: 手順 0、 2の画像 2

  • Two screws are hidden underneath two rubber feet highlighted in red.

  • Use the tip of a spudger to pry the rubber feet out of the lower case.

  • Depending on the age of your device, the rubber feet may crumble apart as you pry them out. If so, use a fine-tipped tool to scrape out any stuck pieces of rubber.

빨간색으로 강조 표시된 두 개의 고무 받침 아래에 나사 두 개가 숨겨져 있습니다.

스퍼저 끝을 사용하여 고무 받침을 하단 케이스에서 들어 올리세요.

[* red] Two screws are hidden underneath two rubber feet highlighted in red.
[* black] Use the tip of a spudger to pry the rubber feet out of the lower case.
+[* icon_note] Depending on the age of your device, the rubber feet may crumble apart as you pry them out. If so, use a fine-tipped tool to scrape out any stuck pieces of rubber.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。