メインコンテンツにスキップ

iPad Mini 3 Wi-Fi LCDシールドプレート交換

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 8を翻訳中

手順8
iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: 手順 0、 3の画像 1 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: 手順 0、 3の画像 2 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: 手順 0、 3の画像 3
  • Take the first pick you inserted and slide it up toward the top corner of the iPad.

  • If you can see the tip of the opening pick through the front glass, don't panic—just pull the pick out a little bit. Most likely, everything will be fine, but try to avoid this as it may deposit adhesive on the front of the LCD that is difficult to clean off.

1番最初に差し込んだピックを、iPadの上部端に向かってスライドして動かします。

フロントガラス越しにピックの先端が見えても焦らないでください。この場合、ピックを少しだけ外側へ戻して下さい。問題ない場合がほとんどですが、奥まで差し込みすぎないように注意してください。液晶ディスプレイ上に接着剤が付いてしまった場合、取り除くのが難しくなります。。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります