手順 1を翻訳中
手順1
Testing the lens
-
Before starting disassembly or on completion of reassembly it is highly recommended that you test the lens.
-
Gently lift the ribbon cable connections off the two tags on the back of the motor.
-
Apply power to the motor from a 3v battery pack by connecting it to the two tags on the motor. Apply positive to the terminal to the front of the lens to extend it, or to the back of the lens to retract. (Keep all ribbons out of the way - applying power inadvertently to the wrong place could damage something.)
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。