手順 5を翻訳中
手順5
Disconnection of zoom motor and sensors
-
In a similar fashion to the focusing lens position sensor, gently scrape away the mastic from the two sensors on the front of the zoom motor, and lift the sensors out.
-
On reassembly, secure the sensors as for the focusing lens position sensor.
-
Lift the two connectors off the back of the zoom motor.
-
Release the ribbon from all the pegs and guides holding it to the lens body. It should now only be attached to the lens back plate.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。