注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての4個のガイドに反映されます。
手順 1を翻訳中
手順1
-
While lightly pulling the rear cover away from the logic board assembly, use the flat end of a spudger to release the clips along the top and bottom edges of the rear cover.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。