注意：あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての17個のガイドに反映されます。
手順 2を翻訳中
手順2
-
Lift the top cover from its rear edge and rotate it toward the front of the PS3.
-
Remove the top cover.
-
There is a plastic hook located in a hole on the top back right hand side corner. Carefully push the plastic hook a bit from the rear of the machine with a spudger to release the rear right of the casing.
| [* black] Lift the top cover from its rear edge and rotate it toward the front of the PS3. | |
| [* black] Remove the top cover. | |
| - | [* black] There is a plastic hook located in a hole on the top back right hand side corner. Carefully push the plastic hook a bit |
| + | [* black] There is a plastic hook located in a hole on the top back right hand side corner. Carefully push the plastic hook a bit from the rear of the machine with a spudger to release the rear right of the casing. |
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。