メインコンテンツにスキップ

iPad Mini 3 Wi-Fi 液晶显示板更换

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての48個のガイドに反映されます。

英語
中国語

手順 1を翻訳中

手順1
iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: 手順 0、 3の画像 1 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: 手順 0、 3の画像 2 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: 手順 0、 3の画像 3
  • If your display glass is cracked, keep further breakage contained and prevent bodily harm during your repair by taping the glass.

  • Lay overlapping strips of clear packing tape over the iPad's display until the whole face is covered.

  • This will keep glass shards contained and provide structural integrity when prying and lifting the display.

  • Do your best to follow the rest of the guide as described. However, once the glass is broken, it will likely continue to crack as you work, and you may need to use a metal prying tool to scoop the glass out.

  • Wear safety glasses to protect your eyes, and be careful not to damage the LCD screen.

如果你的屏幕已经损坏,那么请效益以防止其进一步损坏或者因触摸而导致身体受伤。

在iPad显示屏上重叠贴上透明胶带直到iPad的整块显示屏都被覆盖。

最好尽你的最大努力来完成指南。但是,一旦玻璃已经损坏,它就会随着您的使用而继续损坏,所以你可能需要使用金属撬具来讲玻璃取出。

请佩戴护目镜来保护您的眼睛并且小心以防损坏LCD屏幕。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります