メインコンテンツにスキップ

iPad Mini 3 Wi-Fi LCD Shield Plate Replacement

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての48個のガイドに反映されます。

英語
オランダ語

手順 1を翻訳中

手順1
iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: 手順 0、 3の画像 1 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: 手順 0、 3の画像 2 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: 手順 0、 3の画像 3
  • If your display glass is cracked, keep further breakage contained and prevent bodily harm during your repair by taping the glass.

  • Lay overlapping strips of clear packing tape over the iPad's display until the whole face is covered.

  • This will keep glass shards contained and provide structural integrity when prying and lifting the display.

  • Do your best to follow the rest of the guide as described. However, once the glass is broken, it will likely continue to crack as you work, and you may need to use a metal prying tool to scoop the glass out.

  • Wear safety glasses to protect your eyes, and be careful not to damage the LCD screen.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります