Trek 4300 Bicycle Brakes Replacement

ガイドに戻る

英語

日本語

前の手順次の手順

手順 2を翻訳中

手順2

Trek 4300 Bicycle Brakes Replacement, Removing the Brake Pads: 手順 0、 3の画像 1

Trek 4300 Bicycle Brakes Replacement, Removing the Brake Pads: 手順 0、 3の画像 2

Trek 4300 Bicycle Brakes Replacement, Removing the Brake Pads: 手順 0、 3の画像 3

Removing the Brake Pads

Next, take the nut completely off of the bolt.
There are 5 washers per brake pad so be sure not to misplace any.
It helps to place the nut and washers in order to make reassembly easier.
Remove the three washers in between the nut and caliper. These will be referred to as the outside washers.
Next remove the brake pad from the caliper and remove the two washers sitting in between the caliper and the break pad. These will be referred to as the inside washers.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。