iPod Nano 5th Generation Glass Panel Replacement

注意：あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての4個のガイドに反映されます。

英語

中国語

手順 5を翻訳中

手順5

The glass panel is held in place by adhesive on all four sides. In the following steps, work carefully to avoid cracking the glass.
Insert an iPod opening tool between the display and the glass panel at the top of the device.
Rotate the iPod opening tool towards the rear of the device, slightly lifting the top of the glass out of the outer case.
The glass panel does not raise very far. Do not attempt to completely remove the panel yet, or you are likely to break the display screen.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。