Innerer Rahmen des Motorola Moto G 1. Gen

注意：あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての5個のガイドに反映されます。

英語

ドイツ語

手順 2を翻訳中

手順2

Shut down the phone.
Push SIM card until it pops out.
Remove SIM card.
In some version of this phone, a microSD memory card can be installed. If so, you must also remove these cards.
Be careful as to not damage the microSD memory card. Unlike the SIM card, pushing this in may not spring release, as there may not be an eject mechanism.
If there is no spring release eject mechanism, hopefully your microSD card has a ridge/raised edge that you can push on with your fingernail or plastic/rubber tool to push the card out. This may be difficult - be patient and do not use excessive force/sharp tools that could cause permanent damage and permanent loss of data.

	[* black] Shut down the phone.
	[* black] Push SIM card until it pops out.
	[* black] Remove SIM card.
+	[* icon_note] In some version of this phone, a microSD memory card can be installed. If so, you must also remove these cards.
+	[* black] Be careful as to not damage the microSD memory card. Unlike the SIM card, pushing this in may not spring release, as there may not be an eject mechanism.
+	[* black] If there is no spring release eject mechanism, hopefully your microSD card has a ridge/raised edge that you can push on with your fingernail or plastic/rubber tool to push the card out. This may be difficult - be patient and do not use excessive force/sharp tools that could cause permanent damage and permanent loss of data.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。