メインコンテンツにスキップ

Reemplazo de Placa Lógica del iPhone 6

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての4個のガイドに反映されます。

英語
スペイン語

手順 10を翻訳中

手順10
iPhone 6 Logic Board Replacement: 手順 0、 2の画像 1 iPhone 6 Logic Board Replacement: 手順 0、 2の画像 2
  • Remove the following Phillips screws securing the angled logic board bracket.

  • One 2.6 mm screw

  • One 1.3 mm screw, located horizontally in the upper sidewall of the iPhone.

Retire los siguientes tornillos Phillips que sujetan el soporte de la placa lógica en ángulo.

Un tornillo de 2.6 mm

Un tornillo de 1.3 mm, localizado horizontalmente en el superior de la banda lateral del iPhone.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります