メインコンテンツにスキップ

iPhone 6 Logic Board ersetzen

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての4個のガイドに反映されます。

英語
ドイツ語

手順 7を翻訳中

手順7
iPhone 6 Logic Board Replacement: 手順 0、 2の画像 1 iPhone 6 Logic Board Replacement: 手順 0、 2の画像 2
  • Remove the Wi-Fi antenna from the iPhone.

  • Be careful not to touch any metal to metal contact points with your bare fingers—use tweezers or gloves. Finger oils may disrupt conductivity. If you do touch any of these components, clean them with a degreaser like windex or isopropyl alcohol before reassembly.

Entferne die Wlan-Antenne aus dem iPhone.

Achte darauf, dass du keine Metallkontakte mit den Fingern berührst – nutze Pinzetten oder Handschuhe. Das Fingerfett kann die Leitfähigkeit der Kontakte unterbrechen. Solltest du irgendwelche der Komponenten berühren, putze diese mit Reinigungsalkohol oder etwas Ähnlichem.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります