メインコンテンツにスキップ

iPhone 6 主板更换

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての4個のガイドに反映されます。

英語
中国語

手順 5を翻訳中

手順5
iPhone 6 Logic Board Replacement: 手順 0、 3の画像 1 iPhone 6 Logic Board Replacement: 手順 0、 3の画像 2 iPhone 6 Logic Board Replacement: 手順 0、 3の画像 3
  • When disconnecting the following connectors, only pry up on the connector, not the socket on the logic board or you risk permanent damage.

  • Use the flat end of a spudger to lift the power button and flash assembly cable connector up off of its socket.

  • Lift the volume control cable connector up out of its socket on the logic board.

当拆除以下接口时,仅在接口上撬动,而不是逻辑主板上的插口, 拆除时请小心,否则可能会造成永久性损伤

用平头撬棒把电源键排线从插口里撬起来。

用平头撬棒把音量键排线从逻辑主板上的插口撬起来。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります