メインコンテンツにスキップ

iPhone 6 로직 보드 교체

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての4個のガイドに反映されます。

英語
韓国語

手順 5を翻訳中

手順5
iPhone 6 Logic Board Replacement: 手順 0、 3の画像 1 iPhone 6 Logic Board Replacement: 手順 0、 3の画像 2 iPhone 6 Logic Board Replacement: 手順 0、 3の画像 3
  • When disconnecting the following connectors, only pry up on the connector, not the socket on the logic board or you risk permanent damage.

  • Use the flat end of a spudger to lift the power button and flash assembly cable connector up off of its socket.

  • Lift the volume control cable connector up out of its socket on the logic board.

다음 커넥터를 연결 해제할 때는 로직 보드의 소켓이 아닌 커넥터만 들어 올려야 하며, 그렇지 않으면 영구적으로 손상될 위험이 있습니다.

스퍼저의 납작한 끝을 사용하여 전원 버튼과 플레시 어셈블리 케이블 커넥터를 소켓에서 들어 올리세요.

음량 조절 케이블 커넥터를 로직 보드의 소켓에서 들어 올리세요.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります