手順 4を翻訳中
手順4
-
Use a spudger to walk the power button connector out of its socket on the logic board.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。
Use a spudger to walk the power button connector out of its socket on the logic board.
It is recommended to first push on one side, then the other.
Be very careful not to touch any solder joints on the back of the power supply. The power supply's capacitors may be charged enough to give you a dangerous shock.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。
次の行
前の行
下に新しい行を挿入
上に新しい行を挿入
現在の行をインデントする
現在の行をインデント解除する
現在の行を削除する
次の手順に移動します。
前の手順に移動します。
ヘルプを開く