メインコンテンツにスキップ

iMac Intel 21.5インチ EMC 2805ロジックボードアセンブリの交換

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての4個のガイドに反映されます。

英語
日本語

手順 12を翻訳中

手順12
iMac Intel 21.5" EMC 2805 Logic Board Assembly Replacement: 手順 0、 2の画像 1 iMac Intel 21.5" EMC 2805 Logic Board Assembly Replacement: 手順 0、 2の画像 2
  • Lift the logic board straight up and out of the iMac.

  • Be careful not to snag the board on any of the rear case's screw posts.

  • The I/O inputs at the bottom of the logic board will be the greatest challenge. It is recommended to pull gently to avoid any damage.

ロジックボードを持ち上げて、iMacから取り出します。

リアケースのネジポストに引っかからないようご注意ください。

ロジックボードの底面にあるI / O入力は作業の最大の難関です。 損傷を避けるために、ゆっくりと引っ張ることをお勧めします。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります