メインコンテンツにスキップ

iPad 2 GSMのGPSアンテナの交換

ご注意:あなたは前提となるガイドを編集しています。あなたが行なう変更は、この手順を含むガイド全体に反映されます。

英語
日本語

手順 3を翻訳中

手順3
iPad 2 GSM GPS Antenna Replacement: 手順 0、 1の画像 1
  • Place a reheated iOpener on the top edge of the iPad to soften the adhesive holding the GPS antenna to the rear case.

  • The GPS antenna is essentially a sticker covering the bottom of the right cellular data antenna's compartment. As you work to pry it out in the following steps, there is a good chance that it will tear and break. If you are attempting to salvage the antenna, use plenty of heat and be very careful.

iPad上部端に再加熱したiOpenerを載せ、GPSアンテナを背面ケースに固定している接着剤を柔らかくします。

GPSアンテナは、右側のセルラーデータアンテナのコンパートメントの底を覆っているステッカーです。 次の手順でこじ開けるように作業すると、破れて破損する可能性があります。 アンテナを再利用る場合は、十分に温めてから作業を進めてください。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります