メインコンテンツにスキップ

Reemplazo de la placa base de la Nintendo 3DS XL

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての3個のガイドに反映されます。

英語
スペイン語

手順 5を翻訳中

手順5
Nintendo 3DS XL Motherboard Replacement: 手順 0、 3の画像 1 Nintendo 3DS XL Motherboard Replacement: 手順 0、 3の画像 2 Nintendo 3DS XL Motherboard Replacement: 手順 0、 3の画像 3
  • Using the flat head side of the spudger carefully lift up the flap that attaches the two smaller ribbons to the motherboard.

  • These flaps are located on the top right and bottom right side of the motherboard.

  • Remove the ribbons from the flap.

Con el lado de la cabeza plana del spudger, levanta con cuidado la solapa que une las dos cintas más pequeñas a la placa base.

Estas aletas se encuentran en la parte superior derecha e inferior derecha de la placa base.

Retira las cintas de la solapa.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります