メインコンテンツにスキップ

任天堂 3DS XL 主板更换

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての3個のガイドに反映されます。

英語
中国語

手順 7を翻訳中

手順7
Nintendo 3DS XL Motherboard Replacement: 手順 0、 2の画像 1 Nintendo 3DS XL Motherboard Replacement: 手順 0、 2の画像 2
  • Using the flat head side of the spudger carefully lift up the flap that attaches the ribbon to the motherboard.

  • For this flap lift from the black side.

  • Remove the ribbon from the flap.

  • Reassembly: This wide ribbon is the one with the BLACK STRIPE and goes on the upper (visible) side of the motherboard during reassembly.

使用撬棒扁平的一端小心地抬起将排线连接到主板上的挡板。

对于这个排线,从黑色侧撬起。

取下排线。

重新组装: 这个排线是有 黑色条纹的并在重新组装时条纹位于主板的上部(可见)侧。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります