メインコンテンツにスキップ

Nintendo 3DS XL Hauptplatine Austausch

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての3個のガイドに反映されます。

英語
ドイツ語

手順 7を翻訳中

手順7
Nintendo 3DS XL Motherboard Replacement: 手順 0、 2の画像 1 Nintendo 3DS XL Motherboard Replacement: 手順 0、 2の画像 2
  • Using the flat head side of the spudger carefully lift up the flap that attaches the ribbon to the motherboard.

  • For this flap lift from the black side.

  • Remove the ribbon from the flap.

  • Reassembly: This wide ribbon is the one with the BLACK STRIPE and goes on the upper (visible) side of the motherboard during reassembly.

Klappe den Sicherungsbügel am Flachbandkabel mit dem flachen Ende des Spudgers hoch.

An dieser Klappe musst du von der schwarzen Seite her arbeiten.

Löse das Flachbandkabel.

Zusammenbau: dieses breitere Flachbandkabel hat einen schwarzen Streifen und verläuft auf der oberen (sichtbaren) Seite der Hauptplatine.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります