iPad Air Wi-Fi Front Panel Assembly Replacement

注意：あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての26個のガイドに反映されます。

英語

韓国語

手順 5を翻訳中

手順5

Remove the front panel assembly.
During reassembly, wipe any dust or fingerprints off of the inside of the front panel assembly to ensure a clean display.
If you experience "ghost" or "phantom" touch input issues with your new display, this can be resolved by adding a layer of very thin insulating tape, such as Kapton (polyimide) tape, to the highlighted areas on the back of the panel. iFixit panels come with the proper insulation, and should not require the addition of any tape.
Without the proper insulation, these areas of the digitizer can ground out against other components, causing touch input malfunction.
The insulation is not visible to the naked eye, and is different from the foam dust barrier strips found on many iPads.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。