メインコンテンツにスキップ

iPad Air Wi-Fi LCD Replacement

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての28個のガイドに反映されます。

英語
韓国語

手順 6を翻訳中

手順6
iPad Air Wi-Fi LCD Replacement: 手順 0、 2の画像 1 iPad Air Wi-Fi LCD Replacement: 手順 0、 2の画像 2
  • Use the flat end of a spudger to gently pry the display cable bracket straight up from the logic board.

  • The display cable connector is adhered to the underside of the bracket, so don’t push the spudger too far under the bracket, or you may damage the connector.

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります