メインコンテンツにスキップ

iPad Air Wi-Fi LCD Replacement

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての28個のガイドに反映されます。

英語
韓国語

手順 3を翻訳中

手順3
iPad Air Wi-Fi LCD Replacement: 手順 0、 3の画像 1 iPad Air Wi-Fi LCD Replacement: 手順 0、 3の画像 2 iPad Air Wi-Fi LCD Replacement: 手順 0、 3の画像 3
  • Do not attempt to fully remove the LCD. It is still connected to the iPad by several cables at the home button end. Lift only from the front-facing camera end.

  • Use the flat end of a spudger to pry the LCD out of its recess just enough to grab it with your fingers.

  • Flip the iPad LCD like a page in a book, lifting near the camera and turning it over the home button end of the rear case.

  • Be gentle and keep an eye on the LCD cables as you flip the display over.

  • Lay the LCD on its face to allow access to the display cables.

  • Set the LCD down on a soft, clean, lint-free surface.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります