メインコンテンツにスキップ

iPad Air Wi-Fi フロントパネルの交換

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 26を翻訳中

手順26
iPad Air Wi-Fi Front Panel Replacement: 手順 0、 3の画像 1 iPad Air Wi-Fi Front Panel Replacement: 手順 0、 3の画像 2 iPad Air Wi-Fi Front Panel Replacement: 手順 0、 3の画像 3
  • With the adhesive loosened, you can now insert the pick near the right-hand corner. Slide the pick to the left, and stop just short of the Home button.

  • Just like with the left antenna, only slide from the outer edge toward the center. Reversing this direction may damage the antenna.

接着力が弱くなるため、開口ピックを右側下部の端に挿入します。左側に開口ピックをスライドして、ホームボタンの手前で止めます。

左側のアンテナと同様に、外側の端から中央に向かってスライドします。中央から外側に向けて動かすと、アンテナを傷つけてしまうことがあります。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります