メインコンテンツにスキップ

iPad Air Wi-Fi Touch Screen austauschen

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての76個のガイドに反映されます。

英語
ドイツ語

手順 26を翻訳中

手順26
iPad Air Wi-Fi Front Panel Replacement: 手順 0、 3の画像 1 iPad Air Wi-Fi Front Panel Replacement: 手順 0、 3の画像 2 iPad Air Wi-Fi Front Panel Replacement: 手順 0、 3の画像 3
  • With the adhesive loosened, you can now insert the pick near the right-hand corner. Slide the pick to the left, and stop just short of the Home button.

  • Just like with the left antenna, only slide from the outer edge toward the center. Reversing this direction may damage the antenna.

Wenn der Kleber gelöst ist, kannst du das Plektrum in der Nähe der rechten Ecke einsetzen. Schiebe das Plektrum nach links und halte kurz vor dem Home Button an.

Führe wie bei der linken Antenne das Plektrum nur von der äußeren Kante in Richtung Mitte. Andersherum könnte dies die Antenne beschädigen.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります