メインコンテンツにスキップ

iPad Air Wi-Fi Touch Screen austauschen

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての76個のガイドに反映されます。

英語
ドイツ語

手順 12を翻訳中

手順12
iPad Air Wi-Fi Front Panel Replacement: 手順 0、 3の画像 1 iPad Air Wi-Fi Front Panel Replacement: 手順 0、 3の画像 2 iPad Air Wi-Fi Front Panel Replacement: 手順 0、 3の画像 3
  • Take the first pick you inserted and slide it up toward the top corner of the iPad.

  • If you can see the tip of the opening pick through the front glass, don't panic—just pull the pick out just a little bit. Most likely, everything will be fine, but try to avoid this as it may deposit adhesive on the front of the LCD that is difficult to clean off.

Führe nun den ersten Pick hinauf bis zur oberen Ecke des iPads.

Siehst du den Pick durch das Glas? Keine Panik – ziehe es einfach wieder etwas raus. Meistens wird dadurch nichts beschädigt. Versuche dies aber zu vermeiden, weil der Kleber sonst das LCD oder Glas berühren könnte und sehr schwer zu reinigen ist.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります