メインコンテンツにスキップ

iPad Air Wi-Fi Vervanging van het voorste paneel

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての76個のガイドに反映されます。

英語
オランダ語

手順 8を翻訳中

手順8
iPad Air Wi-Fi Front Panel Replacement: 手順 0、 3の画像 1 iPad Air Wi-Fi Front Panel Replacement: 手順 0、 3の画像 2 iPad Air Wi-Fi Front Panel Replacement: 手順 0、 3の画像 3
  • Place an opening pick in the gap opened by the suction cup.

  • Don't insert the opening pick any deeper than the black bezel on the side of the display. Inserting the pick too far may damage the LCD.

  • Pull the suction cup's plastic nub to release the vacuum seal and remove the suction cup from the display assembly.

Plaats een openingsplectrum in de opening die je zojuist met behulp van je zuignap gecreëerd hebt.

Steek je openingsplectrum niet dieper dan de zwarte rand die je rondom het scherm ziet. Als je je plectrum wel dieper steekt, kun je je LCD beschadigen.

Trek aan de kleine lip op de zuignap om deze los te maken en verwijder deze van het scherm.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります