メインコンテンツにスキップ

iPad Air Wi-Fi Touch Screen austauschen

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての76個のガイドに反映されます。

英語
ドイツ語

手順 8を翻訳中

手順8
iPad Air Wi-Fi Front Panel Replacement: 手順 0、 3の画像 1 iPad Air Wi-Fi Front Panel Replacement: 手順 0、 3の画像 2 iPad Air Wi-Fi Front Panel Replacement: 手順 0、 3の画像 3
  • Place an opening pick in the gap opened by the suction cup.

  • Don't insert the opening pick any deeper than the black bezel on the side of the display. Inserting the pick too far may damage the LCD.

  • Pull the suction cup's plastic nub to release the vacuum seal and remove the suction cup from the display assembly.

Platziere den Opening Pick in dem entstandenen Spalt.

Schiebe den Pick nicht tiefer in das iPad als den lackierten Rand. Andernfalls kannst du das LCD beschädigen.

Löse nun den Saugnapf vom Touch Screen.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります