メインコンテンツにスキップ

iMac Intel 27インチ 2012-2019 接着ストリップの交換

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 28を翻訳中

手順28
iMac Intel 27" 2012-2019 Adhesive Strips Replacement: 手順 0、 2の画像 1 iMac Intel 27" 2012-2019 Adhesive Strips Replacement: 手順 0、 2の画像 2
  • To ensure a strong bond, carefully tip the iMac flat on its back (with the screen facing straight up) and press carefully but firmly around all four edges of the display.

  • Remove the tape securing the display to the rear enclosure.

  • Check the display after 24 hours to make sure that it is not loose on the iMac.

しっかりと固定するには、iMacの背面を慎重に平らに傾けて(スクリーンを真上に向けて)、ディスプレイの四隅全てをしっかりと押します。

ディスプレイをリアエンクロージャーに固定しているマスキングテープを剥がします。

24時間後にディスプレイの状態をチェックして、iMacから緩んでいないか確認します。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります