手順 8を翻訳中
手順8
First melts
-
Rest the soldering iron on the battery pad to heat it up.
-
Once the pad is hot enough, begin adding solder.
-
If solder does not flow immediately when it comes in contact with the pad, remove it and allow the pad to heat up longer.
-
Apply a large gob of solder to the pad (as shown).
-
Tin the iron and return it to its stand.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。