メインコンテンツにスキップ

MacBook Pro 15インチ Retina Display Mid 2012のAirPort/カメラケーブルの交換

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 1を翻訳中

手順1
MacBook Pro 15" Retina Display Mid 2012 AirPort/Camera Cable Replacement: 手順 0、 1の画像 1
  • Use a spudger or tweezers to pry the three AirPort antenna cables straight up off of their sockets on the AirPort board.

  • The cable connection points are fragile. Be careful to lift only on the connector, and not on the socket or cable.

  • To reconnect, align the connector carefully into position over the socket, and press it down firmly with the flat of your spudger.

スパッジャーやピンセットを使って、3本のAirPortアンテナケーブルをAirPortボード上のソケットを持ち上げて接続を外します。

ケーブルの接続部分はデリケートです。ソケットやケーブル上をこじ開けるのではなく、コネクタのみ持ち上げてください。

再接続をする際は、コネクタの位置をソケット上に慎重に揃えてください。スパッジャーの平面側を使って、しっかりと押さえて装着します。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります