注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての3個のガイドに反映されます。
手順 1を翻訳中
手順1
-
Release the copper tape located at the top middle of the phone with a plastic opening tool. This will take some force since the adhesive is rather strong.
-
With the plastic opening tool, release the pop connector, by lifting up to release it. The pop connector should still be attached to the copper tape.
-
Pull up gently on the copper tape and pop connector to remove the back camera. It should pop out easily.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。