注意：あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての5個のガイドに反映されます。
手順 5を翻訳中
手順5
-
Place the earpiece speaker bracket over the speaker so that it fits snugly in its housing.
-
Slide the left hook of the bracket into the notch above the top left corner of the front facing camera.
-
Rotate the bracket so it lays flat on the rear case, aligning the two screw holes. Press the bracket into place, ensuring the hook on the right side of the metal bracket latches onto the display.
| + | [* icon_reminder] To replace the earpiece speaker, it is easiest to install the speaker and bracket together: |
|---|---|
| + | [* black] Place the earpiece speaker bracket over the speaker so that it fits snugly in its housing. |
| + | [* black] Slide the left hook of the bracket into the notch above the top left corner of the front facing camera. |
| + | [* black] Rotate the bracket so it lays flat on the rear case, aligning the two screw holes. Press the bracket into place, ensuring the hook on the right side of the metal bracket latches onto the display. |
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。