メインコンテンツにスキップ

iMac Intel 27インチ EMC 2546 ディスプレイ交換

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 22を翻訳中

手順22
iMac Intel 27" EMC 2546 Display Replacement: 手順 0、 3の画像 1 iMac Intel 27" EMC 2546 Display Replacement: 手順 0、 3の画像 2 iMac Intel 27" EMC 2546 Display Replacement: 手順 0、 3の画像 3
  • Be very careful not to touch the capacitor leads or any exposed solder joints on the back of the power supply (boxed in red).

  • If necessary, a plastic card can be used to cut any remaining sections of the bottom adhesive strip.

コンデンサのリード線または電源の背面の露出したはんだ接合部に触れないように十分注意してください(赤色の枠内)。

必要であれば、プラスチックカードを使用して、底部に残っている細長い接着剤を切断することができます。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります