Xbox Series X Motherboard und Kühlkörper entfernen

ご注意：あなたは前提となるガイドを編集しています。あなたが行なう変更は、この手順を含むガイド全体に反映されます。

英語

ドイツ語

手順 7を翻訳中

手順7

Depending on the condition of the thermal paste and putty, the board may be bonded to the heatsink assembly. If you can't easily remove the board, use a spudger to gently lift the edges of the board to separate it.
Lift the motherboard straight up and off of the heatsink to remove it.
During reassembly, carefully place the board onto the heatsink with the APU facing down. Remember, there's exposed thermal paste on the bottom of the board, so use the alignment pegs to orient it correctly. If you have to reposition the board, it may smear the thermal paste.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。