メインコンテンツにスキップ

iMac 2009-2010 SSDの交換

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 1を翻訳中

手順1
iMac 2009-2010 SSD Replacement, Replace the hard drive with an SSD: 手順 0、 3の画像 1 iMac 2009-2010 SSD Replacement, Replace the hard drive with an SSD: 手順 0、 3の画像 2 iMac 2009-2010 SSD Replacement, Replace the hard drive with an SSD: 手順 0、 3の画像 3
Replace the hard drive with an SSD
  • Follow the next steps if you are replacing your hard drive with an SSD kit.

  • If your SSD enclosure looks like the first image, follow this guide instead.

  • Line up the SSD connectors with the metal enclosure's sockets.

  • Press the drive against the enclosure sockets until the SSD is firmly seated.

  • The SSD connects with the enclosure in only one direction. If the connectors don't line up, rotate the SSD and try again.

SSDキットを使って、ハードドライブ を交換する場合、次の手順以降を参照してください。

SSDエンクロージャーが最初の画像に似ている場合は、こちらのガイドを代わりに参照してください。

SSDコネクタをメタル製エンクロージャーのソケットの位置に揃えます。

SSDがしっかりと固定されるまで、ドライブをエンクロージャーソケットに押し付けます。

SSDは一方向でのみエンクロージャーに接続します。 コネクタが揃っていない場合は、SSDを回転させて再試行してください。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります