メインコンテンツにスキップ

iMac Intel 21.5" EMC 2308 Display Replacement

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての24個のガイドに反映されます。

英語
韓国語

手順 3を翻訳中

手順3
iMac Intel 21.5" EMC 2308 Display Replacement: 手順 0、 3の画像 1 iMac Intel 21.5" EMC 2308 Display Replacement: 手順 0、 3の画像 2 iMac Intel 21.5" EMC 2308 Display Replacement: 手順 0、 3の画像 3
  • Pull the vertical sync ribbon cable out of its socket on the LED driver board near the top left corner of your iMac.

  • The vertical sync ribbon cable has a ZIF style end, but the socket has no lock or retaining flap. Simply pull the cable away from its socket toward the optical drive side of the iMac to disconnect it from the LED driver board.

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります